Product Details

Dr Neubauer Pressure Box

Dr Neubauer Pressure Box
Click to enlarge image(s)
New technology-- The Clean Alternative to Speed Glue!
The perfect tool for tuned rubbers!

With the Dr Neubauer PRESSURE BOX, you will not ever need to use speed glue again, and you do not need to pay a manufacturer to “tune” your rubber-- you can do it yourself! With the Pressure Box, you can achieve the speed glue effect of tuned rubbers over a long period of time. And by using higher pressure you can increase the effect. The whole bat is placed into the Pressure Box on a regular basis for a continued speed glue effect. A small pressure of 0.5 or 1 bar maintains the dynamic speed glue effect of your tuned rubbers for several months running. For greater speed glue effect, the speed can be further enhanced by adjusting a higher pressure of 2 bar. The Pressure Box only uses compressed air and is therefore non-toxic and compatible with new ITTF regulations.

Simply put the whole bat (with the rubbers glued on) in the Pressure Box and close it firmly by tightening the 6 screws. Then connect the hand pump to the valve and pump in air until you reach a pressure between 0.5 and 2 bar. The actual pressure inside the Pressure Box can be seen on the manometer:
-- 0.5 to 1 bar: The speed glue effect of tuned rubbers is being maintained for a long period of time (up to 6 months).
-- 2 bar: The speed glue effect of tuned rubbers is being maintained and even enhanced.

With the Dr Neubauer Pressure Box, it is not necessary to ever re-glue your rubber again!
Home  ·  About Us  ·  Contact Us  ·  Shipping  ·  Policies  ·  Links  ·  Site Map
Copyright ©  Bronx, New York